3D printing is becoming an increasingly key technology for the Dutch Navy. By printing parts onboard frigates, they will be less dependent on complex logistics operations. The latest development is the AMCOD, a mobile repair center integrated into a standard shipping container. Within an hour after installation, defense units anywhere in the world can start 3D printing polymer parts. In this AMCOD, the INTAMSYS FUNMAT PRO 410 3D printer is used to print replacement parts that are subjected to both mechanical and thermal stress.
When a Dutch naval vessel leaves on a mission from the port of Den Helder, one hour north of Amsterdam, there are about 30,000 spare parts on board. These are needed to keep the ship operational throughout the duration of the mission. These components vary from high-quality engine parts to covers for the shower drain, from protective covers for rockets to weed filters for cold water makers.
“If we could print ten percent of those 30,000 parts, we will reduce our logistics footprint dramatically,” says Max Nijpels, who works at the Expertise Centre Additive Manufacturing (ECAM), an innovation lab within the Directie Materiële Instandhouding (DMI), the maintenance department of the Royal Dutch Navy. “If we can replace that ten percent with a 3D printer and a few rolls of filament, we will save storage space, weight and logistical handling. At the same time additive manufacturing enables us to increase operational deployability.”
Step up to higher quality replacement parts
MARAMEX, the internal naval platform for the exchange of 3D files, printer settings and descriptions, already contains several hundred components that have been tested and validated. The ECAM-trained naval personnel onboard can reverse engineer parts themselves if they are not available for download on the “Thingiverse of the Navy”. So far, these are non-critical parts, for which PLA is sufficient as a material. ECAM now wants to go a step further. That is why it has invested in three high-temperature capable 3D printers from INTAMSYS: one basic FUNMAT HT model and two FUNMAT Pro 410s, the industrial version.
Max Nijpels: “We want to print replacement parts that can be used in, for example, the engine compartment, where the temperature can rise sharply. Or in applications in which the part is subjected to heavier mechanical stress”. This requires 3D printing with advanced polymers such as Polycarbonate, PEKK and PEEK and nylon filled with carbon fibres. The three INTAMSYS FUNMAT printers were purchased for this purpose. “These will work together with the standard FFF printers. Where they fail in terms of printing material, we will use the new 3D printers.”
Open platform and stable print results
For the Dutch Navy, three criteria were important when selecting a high-temperature 3D printer: that it is an open platform, it can use a free choice of materials, and that it be just as easy to operate as a standard FFF printer for PLA, with a reliable result.
Max Nijpels: “The INTAMSYS 3D printers allow us to print with Polycarbonate or PEKK just as easily as with PLA, thanks to the build chamber being heated to 90 degrees. The printer manufacturer has found the right balance in terms of temperature control so that the temperature is high enough to prevent warping and sufficient cooling to ensure good adhesion of the layers and to prevent the part from collapsing due to overheating.”
Openness needed for process certification
The open platform of the INTAMSYS high-temperature capable 3D printers is another crucial criterion for the Dutch Navy. The printer manufacturer offers customers the ability to use validated filaments from major manufacturers, but they can also select filaments from different brands and develop their own settings. The navy wants to be completely independent in terms of the choice of materials.
“We want to go to process certification in the future. For some parts Loyyds / DNV certification is necessary. For this we need to know which raw materials are used in the filament,” explains Max Nijpels.
INTAMSYS offers this free choice of material because the user can set all the parameters himself in the 3D printer. Once these are fixed, or the navy adopts the profile of one of INTAMSYS’s partners, 3D printing with these high-quality polymers is just as easy as with PLA. Exactly what the navy is looking for because in the field everything revolves around operational usability.
AM-container
In order to be even less dependent on logistic supply chains, ECAM has developed the AMCOD for all defense units in The Netherlands: Additive Manufacturing Container for Defence. This contains the INTAMSYS PRO 410, the industrial high-temperature capable 3D printer, which includes a filament bay with cooling and drying and double print heads. In a shipping container, equipped with air conditioning, ventilation, and a UPS to prevent fluctuations in the peak load of the generator disturbing the 3D printers, two CAD workstations have been created and there are three FFF printers, including the INTAMSYS PRO 410. The AMCOD can be installed and be operational within an hour. In this way, a Marine Corps on mission anywhere in the world is no longer dependent on complex logistical supply lines, but can print its own spare parts, which can be used immediately, thanks to the robust printing process of the INTAMSYS printers.
About INTAMSYS
INTAMSYS is a world-leading high-tech company providing 3D printing and industrial direct additive manufacturing solutions for high-performance materials. It is co-founded by a team of engineers from world-class high-tech companies engaged in precision equipment development and high-performance materials research for many years.
Focusing on aerospace, aviation, automotive, electronic manufacturing, consumer goods, healthcare, scientific research and other industries, the company provides comprehensive additive manufacturing solutions from functional test prototyping, tooling and fixture manufacturing to direct mass production of final products, covering equipment, software, high-performance materials and printing services. For further information, please visit www.intamsys.com
If you're looking to get architectural 3D animation in the USA, our service provides an exceptional way to bring your architectural concepts to life through dynamic, immersive visuals. Through our platform, you can easily request high-quality 3D animations that showcase your designs in motion, offering a detailed view of your project from multiple angles and perspectives. Whether it's for a real estate development, a commercial building, or an urban planning project, our expert team ensures that every detail is captured in a visually compelling animation.
Through our website, you can seamlessly get architectural 3D animation tailored to your project’s specific needs. With our help, you can offer potential clients or investors an engaging experience that goes beyond static images. By integrating CGI animations with real-world settings, lighting, and textures, our team creates a lifelike experience that allows your audience to interact with your project as though it were already built. This service is perfect for presenting complex designs in a clear, visually attractive way that stands out in the competitive architectural market.
